[PEDA] Mouse Scroll Wheel in Protel 99SE/Dual Screens

[ajenkins@avtron.com]

One might also consider that dual screens can in some circumstances be
productively employed by calling two instances of P99SE, one for each
screen... 

aj

>-----Original Message-----
>From: PEDA-bounces at techservinc.com 
>[mailto:PEDA-bounces at techservinc.com] On Behalf Of Brad Velander
>Sent: Tuesday, June 20, 2006 7:51 PM
>To: peter at gptdesigns.com.au; Protel EDA Discussion List
>Subject: Re: [PEDA] Mouse Scroll Wheel in Protel 99SE/Dual Screens
>
>Hi Peter,
>	Sure you can do dual screens with P99SE. It is not full 
>100% dual screen functional/compatible (as would be a newer 
>version that's written for dual screens) but it does work 
>splitting P99SE across two monitors.
>
>	Except for the annoying jump of the split that randomly 
>changes such that you end up with one window split across 1.5 
>monitors instead of split down the middle. But that only 
>happens occasionally, just enough to be annoying but not 
>totally frustrating.
>
>Sincerely,
>Brad Velander
>Senior PCB Designer
>Northern Airborne Technology
>#14 - 1925 Kirschner Road,
>Kelowna, BC, V1Y 4N7.
>tel (250) 763-2232 ext. 225
>fax (250) 762-3374
>
>
>-----Original Message-----
>From: Peter Krause [mailto:peter at gptdesigns.com.au]
>Sent: Tuesday, June 20, 2006 3:35 PM
>To: PEDA at techservinc.com
>Subject: [PEDA] Mouse Scroll Wheel in Protel 99SE/Dual Screens
>
>
>Hi Steve and Christian.
>
> 
>
>Did you have any responses to the scroll wheel ?
>
> 
>
>Also Altium has suggested a dual DVI card, but can you display 
>dual screens with Protel 99 SE ?
>
> 
>
>Kind Regards,
>
> 
>
>Peter R & D
>
>
> 
>____________________________________________________________
>You are subscribed to the PEDA discussion forum
>
>To Post messages:
>mailto:PEDA at techservinc.com
>
>Unsubscribe and Other Options:
>http://techservinc.com/mailman/listinfo/peda_techservinc.com
>
>Browse or Search Old Archives (2001-2004):
>http://www.mail-archive.com/proteledaforum@techservinc.com
> 
>Browse or Search Current Archives (2004-Current):
>http://www.mail-archive.com/peda@techservinc.com
>
>


This e-mail transmission and its attachments may contain information from Avtron Manufacturing, Inc. that is proprietary, privileged and/or confidential and is intended exclusively for the person(s) to whom it is addressed. Any use, copying, retention or disclosure by any person other than the intended recipient or the intended recipient's designees is strictly prohibited. If you have received this message in error, please notify the sender immediately by return e-mail and delete all copies.